Torso, Vents and Microphone

Here is how the Replica torso is turning out so far. Note the Microphone in the Robot’s claw. That Microphone is fully operational. I got it from Mike Joyce as he was cleaning out his old stuff. Apparently it was machined and made specifically for the B9 by a club member who is no longer active. It is beautiful and works great too!

Also ote the vents inside the torso. I used a combination of superglue on the bottom of the rail and plummers liquid steel epoxy putty on the top rail . The rails and vents are from Craig Reinbrecht. The vents move like glass!!!

What I need to figure out now is how to attach the metal vents and black cloth that goes behind the vents that will still allow me to open the vents fully for access to the various electronic boards and the torso attachments to the donut.
On a side note, please note the keying of the radar section below for the bubble lifter. This is essential for proper bubble lifter operation but more on that later…… (I have to keep you coming back for more) :)